Combining physical vapor deposition structuration with dealloying for the creation of a highly efficient SERS platform

• Adrien Chauvin,
• Walter Puglisi,
• Damien Thiry,
• Cristina Satriano,
• Rony Snyders and
• Carla Bittencourt

Beilstein J. Nanotechnol. 2023, 14, 83–94, doi:10.3762/bjnano.14.10

• Nanostructured noble metal thin films are highly studied for their interesting plasmonic properties. The latter can be effectively used for the detection of small and highly diluted molecules by the surface-enhanced Raman scattering (SERS) effect. Regardless of impressive detection limits achieved, synthesis

Out-of-plane surface patterning by subsurface processing of polymer substrates with focused ion beams

• Serguei Chiriaev,
• Luciana Tavares,
• Vadzim Adashkevich,
• Arkadiusz J. Goszczak and
• Horst-Günter Rubahn

Beilstein J. Nanotechnol. 2020, 11, 1693–1703, doi:10.3762/bjnano.11.151

• Southern Denmark, Alsion 2, Sønderborg, 6400, Denmark 10.3762/bjnano.11.151 Abstract This work explores a new technique for the out-of-plane patterning of metal thin films prefabricated on the surface of a polymer substrate. This technique is based on an ion-beam-induced material modification in the bulk

• for well-controlled and nanometer-precise patterning of the height of metal thin films and nanostructures prefabricated on the surface of these substrates. This technique is based on subsurface chemical decomposition, structural reconstruction, and, as a result of these processes, volume shrinkage of

• films were used in order to minimize energy losses of Ne+ and Ga+ ions in these films. In all other cases, such as patterned Pt60Pd40 films on PC and PDMS substrates and patterned Au films on PMMA substrates, 15 nm metal thin films were used to facilitate the comparison with previously published results

Structural optical and electrical properties of a transparent conductive ITO/Al–Ag/ITO multilayer contact

• Aliyu Kabiru Isiyaku,
• Ahmad Hadi Ali and
• Nafarizal Nayan

Beilstein J. Nanotechnol. 2020, 11, 695–702, doi:10.3762/bjnano.11.57

• enhances the photoresponse and the rectification properties of the ITO device. Single or double metal thin films of Ag, Al, Ti, Au, Cr, or Ni have been embedded between ITO layers [4][8][14][15][16][17]. Free electrons in the metal/ITO materials accelerate the separation of charge carriers and hence

• . Generally, the inclusion of low-resistivity metal thin films, coupled with a reduction in grain boundary scattering after annealing, is responsible for the large reduction in both sheet resistance and resistivity. Moreover, the optoelectronic properties of the IAAI films are better compared to those in the

Direct observation of the CVD growth of monolayer MoS₂ using in situ optical spectroscopy

• Claudia Beatriz López-Posadas,
• Yaxu Wei,
• Wanfu Shen,
• Daniel Kahr,
• Michael Hohage and
• Lidong Sun

Beilstein J. Nanotechnol. 2019, 10, 557–564, doi:10.3762/bjnano.10.57

• synthesizing large-area 2D TMDCs have been reported, including mechanical exfoliation, sulphurization of metal thin films, mass transport, molecular beam epitaxy (MBE) and chemical vapor deposition (CVD) [6][7]. In particular, CVD is considered to be an attractive and very promising approach for large-scale

Au–Si plasmonic platforms: synthesis, structure and FDTD simulations

• Anna Gapska,
• Marcin Łapiński,
• Paweł Syty,
• Wojciech Sadowski,
• Józef E. Sienkiewicz and
• Barbara Kościelska

Beilstein J. Nanotechnol. 2018, 9, 2599–2608, doi:10.3762/bjnano.9.241

• agreement with experimental data obtained in the UV–vis range. Keywords: Au plasmonic platforms; dewetting; eutectic; finite-difference time domain (FDTD); Introduction The evolution of metal thin films into nanostructures under various thermal conditions has been repeatedly studied for many years

Refractive index sensing and surface-enhanced Raman spectroscopy using silver–gold layered bimetallic plasmonic crystals

• Somi Kang,
• Sean E. Lehman,
• Matthew V. Schulmerich,
• An-Phong Le,
• Tae-woo Lee,
• Stephen K. Gray,
• Rohit Bhargava and
• Ralph G. Nuzzo

Beilstein J. Nanotechnol. 2017, 8, 2492–2503, doi:10.3762/bjnano.8.249

• , as well as the surrounding dielectric environment. Sputter coating and e-beam evaporation are both widely used tools for fabricating metal thin films, yet the distribution of the deposited metal film resulting from each of the two methods are quite different due to the distinctive deposition

Assembly of metallic nanoparticle arrays on glass via nanoimprinting and thin-film dewetting

• Sun-Kyu Lee,
• Sori Hwang,
• Yoon-Kee Kim and
• Yong-Jun Oh

Beilstein J. Nanotechnol. 2017, 8, 1049–1055, doi:10.3762/bjnano.8.106

• processes were discussed. The results are promising for low-cost mass fabrication of devices for several photonic applications. Keywords: dewetting; metal thin films; nanoimprint; nanoparticles; self-assembly; Findings Thin films on nonreactive solid surfaces, having a high surface area relative to their

In situ observation of deformation processes in nanocrystalline face-centered cubic metals

• Aaron Kobler,
• Christian Brandl,
• Horst Hahn and
• Christian Kübel

Beilstein J. Nanotechnol. 2016, 7, 572–580, doi:10.3762/bjnano.7.50

• absolute statements on the exclusive operation of one class of deformation mechanisms at the nanoscale and favor the explanation of multiple concurrent mechanisms and with different overall weighting between them compared to their coarse-grained counter parts. Experimental Metal thin films were deposited